-
Electrolysis
Electrolytic dissociation process is used to deposit powders at the cathode.
-
Rinsing and Neutralizing
When the powder is collected, it contains large amounts of electrolyte. Therefore, the powder is treated with a neutralization process after thoroughly rinsing it.
-
Dehydration
The rinsed metal powder is dehydrated by a suction process.
-
Drying
The powder is dried using a hot air dryer.
Parameter settings are configured to minimize the progression of oxidation. -
Sieving
Powders are sieved into several size levels to prepare powders for adjusting the size distribution based on the target application.
-
Mixing
The size distribution of products is adjusted based on the target application.
-
Inspecting
Powders are inspected to make sure they satisfy applicable standards.
Technical information